vc1 vcxo series full size or half size metal thru-hole voltage controlled xtal oscillator cmos/ ttl compatible standard specifications overall frequency stability 25, 50, 100 ppm 15, 25, 50, 100 ppm over otr operating temperature range (otr) 0 to +70 c is standard, but can be extended to - 40 to +85 c for certain frequencies supply voltage (vcc) 5.0 volts and 3.3 volts available output load standard load is 15pf maximum, see test circuit 7 (consult factory for heavier loads) control voltage range (cvr) 0.5 to 4.5 volts for 5.0 volt supply; 0.0 to 3.3 volts for 3.3 volt supply pullablity over cvr 25, 50, 100, 150, 200 ppm. consult factory for 300 ppm. linearity 10% (consult factory for 5%) supply current icc (ma) rise and fall time tr & tf (ns) frequency range (mhz) typical maximum typical maximum 2.000 ? 20.000 10 15 3.5 5.0 20.001 ? 30.000 20 25 3.0 4.5 30.001 ? 50.000 25 30 3.0 4.0 50.001 ? 60.000 30 35 2.5 3.5 60.001 ? 160.000 tbd tbd tbd tbd part numbering guide model frequency stability frequency in mhz frequency deviation (pullability) over cvr 3 vc14h 100 a z - 60.0m - xxx (internal code or blank) consult factory for available frequencies and specs. not all options available for all frequencies. a special part number may be assigned. t: 25 ppm v: 50 ppm w: 100 ppm frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 23 jan 2004 pl tronics, inc. mechanical: not to scale inches (mm) vc13h = full size, 5.08mm vc14h = full size, 8.0mm vc15h = half size, 6.0mm vc16h = half size, 7.5mm vc13 & vc14 vc15 & vc16 frequency range 2.00 to 20.00 mhz model vc13 & vc15 vc14 & vc16 2.00 to 20.00 mhz 20.001 to 160.00 mhz 15 ppm only x: 150 ppm y: 200 ppm z: 300 ppm operating temperature range a: 0 to +50 c b: 0 to +70 c c: -10 to +70 c d: -20 to +75 c e: -30 to +75 c f: -40 to +85 c 25: 25 ppm 50: 50 ppm 100: 100 ppm 15: 15 ppm supply voltage blank= 5.0 volts 5% 3= 3.3 volts 5% (n/a for vc13, 15) n/a for 2.0 to 20.0 mhz (vc14, 16) use vc13, 15 for 2.0 to 20.0 mhz due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. packaging tube or on pads pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) .807 (20.5) max .500 (12.7) max vc13: .200 (5.08) .600 (15.24) .300 (7.62) 1 7 14 8 vcon vcc out gnd .031 (0.8) .250 (6.35) max .020 (.51) vc16: .295 (7.5) max .020 (.51) .250 (6.35) max .492 (12.5) max .300 (7.62) .492 (12.5) max .300 (7.62) 1 4 8 5 vcon vcc out gnd .031 (0.8) vc15: .236 (6.0) vc14: .315 (8.0) max 2.00 mhz ? 160.00 mhz
|
